Clifford Blackjax
- Thread starter derekrx
- Start date
markobucko
Octane Boostaholics
in the clifford owners manual
sligo_dave
Petrolheads
any idea how to enable the black jax when disabled??? sorry for ji-jack
Altezza-Dan
Octane Boostaholics
same way you disable it
sligo_dave
Petrolheads
Altezza-Dan said:same way you disable it
and hows that? was disabled when i got the car.
Altezza-Dan
Octane Boostaholics
turn the key in ignition to on, enter your black jaxx code, press door lock button, should get 1 beep, turn off ignition , should get 3 beeps and that should be it! if you don't have code, talk to Scoobymaniac he has software to mess with the alarms and could probably reset your code
noeler2006
Middle Lane Hogs
talk to phill (scoobymaniac) the guy is a genious wit alarms
markobucko
Octane Boostaholics
wouldnt comment too much on this in open forum
Altezza-Dan
Octane Boostaholics
all this information is available on the "public" internet lads! still need your pin to make any changes which you shouldn't be telling anyone!
Rob Spec C
Octane Boostaholics
page 33/34 in the manual
CARLO
Well-known member
Lads i tries using manual and ducked up alarm. kEPT GOING OFF AT ALL HOURS OF THE DAY AND NIGHT.If i looked at it for too long it went off.rain,wind cars going by, birds singing too loudly.
Nearly had a mob with petrol and crusafix knocking on me door.
Pm Phil. Wort it in the long run
Nearly had a mob with petrol and crusafix knocking on me door.
Pm Phil. Wort it in the long run
S
Scoobymaniac
Guest
There is no need to go through long programming menus with the Concept 650 mkI & mkII
When the Blackjax is in Bypass mode the LED will flash 10 times everytime you turn off the ignition, as a reminder
When the Blackjax is in Bypass mode the LED will flash 10 times everytime you turn off the ignition, as a reminder