Altezza-Dan
Octane Boostaholics
im am in the middle of install new front mount and since i have the vf36 in my i had to originally clock the compressor housing to make it work with the legacy style tmic. Now since i need to put it back to standard orientation there is a metal coolant pipe in the way on the right side of the turbo that i need to remove temporarily and refit. Unfortunately i started loosing the two 17mm bolts that hold it on and coolant start pissing out. Do i need to drain all the coolant out or is there only a bit that is in the pipework there and i should just top it up when done? if its only a bit of coolant that will come out of here ill let it drain out and worry about it afterwards. Also this might sound stupid but is the coolant flammable at all as im sure some has splashed onto the turbo, i dont want to see a ball of flames coming at me when the turbo warms up!
Cheers
Dan
Cheers
Dan