clutch kit

was thinking of doing new flywheel .

Basically want to give the car a full once over and have it right .

mechanical side before Christmas and cosmetic after
 
tommy 555 said:
was thinking of doing new flywheel .

Basically want to give the car a full once over and have it right .

mechanical side before Christmas and cosmetic after
Click to expand...

Just skim it and replace the centre needle bearing.
Unless it's got savage heat it will be fine.

How come it needs a clutch? You must be an animal on it!
 
Grahamo spec c said:
Just skim it and replace the centre needle bearing.
Unless it's got savage heat it will be fine.

How come it needs a clutch? You must be an animal on it!
Click to expand...


biggest ware and tear on the clutch is actually getting the car in and out of the garage . ramp is way 2 steep and it's a ***** to get into . plus after i had the engine work done the mapping work on it I stuck a standard clutch into it which was a mistake at the time
 
Last edited:
tommy 555 said:
biggest ware and tear on the clutch is actually getting the car in and out of the garage . ramp is way 2 steep and it's a ***** to get into . plus after i had the engine work done the mapping work on it I stuck a standard clutch into it which was a mistake at the time
Click to expand...

Still don't get it?
6 track days,90km of road/traffic driving and all abuse over back roads,in and out of my garage with simular incline.
Plus it's in and out for any nixer I do... every week...

Your an animal on a clutch...!!!

Last time I was following it was the brakes you were burning off it.. :)

My yoke built in 04 and my 8 years of ownership, clutch is like new..

Less polish and more mechanical sympathy...

Someone said a civic burned your clutch out...???
Lost with me?

No ideas???
 
Went to move the hen house... pedal went to the floor...!

Ha ha only joking! :)

Jesus I hate the car and what I've spent on it.

It's like a Swiss clock 24/7 but with age and laws, I'd love to send her on to a lawless land, for someone to enjoy it.

All the track days I've done in her and she performed 110%, will never compare to the dice I had last Friday morning.

Ate a golf R who was a customer of my job.
Straight line 4th,5th,6th.....

Pulled on him like a train...

I got a thumbs up from him when he pealed off.

I wonder why I hide it away and why I don't cash in cut my losses!

Off topic sorry!

Lost on me in the modern era, fast driving is the devil now days.
 
I used ACT in the past and found them really good, they were offering far more Torque rating than any similar clutch. I used it on a Fidanza Billet aluminium 6spd flywheel with the replaceable friction surface. I used a sprung paddle clutch which to my surprise was almost like standard to use, even do it was rated for I think 650ftlbs.... I would definitely look at there upgrade from standard if I was you. www.advancedclutch.com
 
Last edited:
You must log in or register to reply here.
Back
Top