Help me find Wishbone for my car

Zheiko

Zheiko

Octane Boostaholics
So I need left side N/A wishbone. It was supposed to be ordered by Dave, but his suplier asked him crazy amount for it, so I am left now with trying to find my own piece somewhere else...

so what I need is this: Transverse link assembly-left, 20202FE570

and here is list of models that were using the same part:

http://opposedforces.com/parts/info/20202FE570/

Please, help me, if you know about someone who is specializing in breaking subarus and might have the part, or maybe even come accross a website that sells them, even new, for as long as its not gonna be 500euro...

Thanks a milion guys... I am getting very desperate here now... :imlost:
 
Hi again,

well that part arrived and when I tried to install it, it didnt fit, then I found out that its for WAGON only, and they dont have SEDAN version.

So I rang dealership and asked for price, they quoted me 460euro just for the part itself. So I requested at least model number, which is 20202FE571

Would you guys have any idea where to find that price? cheapest I found is 200+40e postage from US, but then, there is still a big questionmark if it will fit..
 
scoobysub said:
No differance between wagon and saloon wish bones
Click to expand...

There is, I could not fit the Wagon one.



So here are the two next to each other, I have highlighted the bits that doesnt match:

in Circle, there is Droplink mount, the one on Wagon is made out of two bits, while original was only one bit.

Then red distance line, Wagon was slightly longer and I could not fit the wishbone in there

Blue and Yellow on wagon were a bit longer too, so I could not tighten it properly and it was very loose in the bushing
 
update:

So I have registered on website FIRSTLINE, who is actually the manufacturer of the wishbone that I got suplied from the store, and based on their catalogue, the one that they delivered to me is designed for this car:

GC/GF8M 2.0iM 1994cc 4cyl 16v DOHCM engine code: EJ20 113-123bhpM 4x4M 12/95-11/00
 
You old wishbone is bent so you cant get a propper distance but i.m 100% sure its the same lenght . The droplink point is differant ok
 
scoobysub said:
You old wishbone is bent so you cant get a propper distance but i.m 100% sure its the same lenght . The droplink point is differant ok
Click to expand...

Well, of course it will be different distance since its bent, but I tried to fit it with no luck. While the screwie part was all in, the little shoulder was still like 0.5cm away from being able to be put in there. But no harm done, I have given them the part back and they will refund me, so all clear here. Only problem is getting the right part...
 
Also in the classic , all wrx/Sti wagons had steel wishbones but are interchangeable with alloy.
 
GORDON GT SERIES II said:
The mounting points are different as well baz like one is an sti type and the other is a wrx
Click to expand...

On the classic Gordon?
 
No i just meant those in the pic they have 2 different drop link mountings strange if they're both steel i always thought only the sti and wrx had different ones
 
My car had the sti type and I know that shamrock Na wagon had the steel type strange alright Noel from carrol and roache said wrx blob model 05-06 (with silver hawk dash has em so)
So I'd say wrx hawk has and Na hawk dosent

Ciaran WRX
 
You must log in or register to reply here.
Back
Top