copperhead
Petrolheads
dose anybody have any info on these 
more images Gizzmo launch Interface
Gizzmo Launch Interface
Fully adjustable launch control
Adaptive auto detect software
Interface for 1-6 coil application
Fuzzy Logic technology
Sequentially induced misfire
Technology
Gizzmo's launch Interface integrates with the Gizzmo Tach Recall
Shiftlight to enable the fully adjustable launch control function. The launch control function induces sequential misfire events at the desired rpm set by the user.
In a turbo application, having the throttle open while inducing misfire
increase the velocity and density of exhaust gases, allowing the turbo to spool up and generate boost with load. This results in boost being
generated before launching and therefore allowing a vehicle to launch with considerably more power. The ignition cut is clutch activated
allowing flat changing (the ability to change gear without removing your foot from the throttle). With the clutch engaged the rpm will pull back to the launch rpm previously set by the user in order to avoid over reving, this results in the vehicle not coming off boost while moving through the gears.
Launch control can benefit natural aspirated cars by giving a consistent launch rpm for best results every time, and enable quicker gear changes through flat changing.
Compatible Vehicles:
All Nissans
All Subarus
All Mazdas accept Rotaries
All Hondas
All Mitsubishis
The Rules:
Typically the launch interface will work on any car that has an Igniter that
A) is triggered via the ECU
B) is not inside of the ECU
C) have not got a feedback system to the ECU e.g.(Toyota)
D) have not got a ignition control box that encompasses the igniter e.g.(Holden Commodore V6s)
Vehicles known that are not compatible
All Holden V6s
All Toyotas
All Diesels
Price: £93.72
(Excluding: VAT at 17.5%)

more images Gizzmo launch Interface
Gizzmo Launch Interface
Fully adjustable launch control
Adaptive auto detect software
Interface for 1-6 coil application
Fuzzy Logic technology
Sequentially induced misfire
Technology
Gizzmo's launch Interface integrates with the Gizzmo Tach Recall
Shiftlight to enable the fully adjustable launch control function. The launch control function induces sequential misfire events at the desired rpm set by the user.
In a turbo application, having the throttle open while inducing misfire
increase the velocity and density of exhaust gases, allowing the turbo to spool up and generate boost with load. This results in boost being
generated before launching and therefore allowing a vehicle to launch with considerably more power. The ignition cut is clutch activated
allowing flat changing (the ability to change gear without removing your foot from the throttle). With the clutch engaged the rpm will pull back to the launch rpm previously set by the user in order to avoid over reving, this results in the vehicle not coming off boost while moving through the gears.
Launch control can benefit natural aspirated cars by giving a consistent launch rpm for best results every time, and enable quicker gear changes through flat changing.
Compatible Vehicles:
All Nissans
All Subarus
All Mazdas accept Rotaries
All Hondas
All Mitsubishis
The Rules:
Typically the launch interface will work on any car that has an Igniter that
A) is triggered via the ECU
B) is not inside of the ECU
C) have not got a feedback system to the ECU e.g.(Toyota)
D) have not got a ignition control box that encompasses the igniter e.g.(Holden Commodore V6s)
Vehicles known that are not compatible
All Holden V6s
All Toyotas
All Diesels
Price: £93.72
(Excluding: VAT at 17.5%)