Muppet. Me. . !

[keeper-of-the-keys]

Hi. I have a problem with a leaking injector. I have followed all the suggestions given to identify the problem and I do believe these are the original injectors.
But have a made a BIG booboo. ?
I removed the injectors complete with the rails, D/side & P/side. But then I started to clean up the rails and stick the Injectors in the ultrasonic bath, I removed all the injectors put them in a bag and while having a cuppa I got a nipping of the old sphincter, "DO THESE HAVE TO GO BACK WHERE THEY CAME FROM" (Do they have to return to thier original positions)
Any thoughts, comments,
Help. Very welcome.
Thanks. Mark.

 

[scoobysub]

No they are all the same injectors so can swap around to whatever position

 

[BazGF8]

Not really no,

have you any way of confirming the injector is working after the work before refitting?

Best thing to probably do is drop them in and get them cleaned and flow bench tested , westward engineering did this for me before

 

[scoobysub]

I’m guessing he’s cleaned them And having them flow tested to see which 1 is bad if it’s bad at all and re installing them
On the + side he’s a 25% chance of guessing which 1 is the bad 1 do good odds

 

[keeper-of-the-keys]

Too right.
I will get them to a company and have them sorted.
Thank you everyone