r160 diff needed with drive shafts

R

rfrbdave

Octane Boostaholics
Hello I am looking for an r160 diff with a drop gear ratio of 3.9 and two rear drive shafts with cv's to go with it. I curently have and r180 diff in my leggy and am finding it difficult and expensive to machine out a custom made rear drive shaft. so best thing to do is to go back to r160 set up, any help with good condition parts would be helpful.
 
No dave it's just more cost effective in the long run to go back to r160 set up it takes the uncertainty of cost and time scale of getting custom made shafts done in the future. Any help would be great in sourcing the gear
 
Thanks dave I did some research and its actually a 3.545 reae ratio I need I think ive sourced one with two drive shafts
 
Re: Re: r160 diff needed with drive shafts

rfrbdave said:
Thanks dave I did some research and its actually a 3.545 reae ratio I need I think ive sourced one with two drive shafts
Click to expand...

a 3.54 with x2 driveshafts e175

or a lsd one +75
 
You must log in or register to reply here.
Back
Top