spongy brakes

kbox

kbox

Octane Boostaholics
Hi I changed the pads front and rear earlier and the pedal is fairly soft. I know the brakes need about 200miles to bed in but how hard should the pedal be?
 
bleed them just to be sure . the pedal always feels softer after ya change pads it's not it just takes a while for them to bed in especially on old discs that are worn. .did you check the fluid level you probably had to take some out after fitting new pads front and rear if the level was correct with the old pads .
 
is it pulling to one side or straight n true? as above might be needin a drop of fluid or have an air bubble
 
it was right at the top just over the max level indicator alright. I'll bleed them now then

Its it perfectly balanced when I brake
 
kbox said:
it was right at the top just over the max level indicator alright. I'll bleed them now then

Its it perfectly balanced when I brake
Click to expand...

I'd say air in the system, Here the correct bleeding sequence:

airbleeding.jpg
 
You must log in or register to reply here.
Back
Top