Alan Browne
Sunday Drivers
I had a known head gasket issue. There was also signs of oil in the intercooler hoses so to do the job right I stripped the lot. Everything crankshaft and bore wear wise is good. Unfortunately the piston from cylinder 4 is not:
I see the pistons referred to as dogbone pistons on some forum posts due to the shape of the pocket in the crown.
They are standard 92 mm with the letters ART cast on the side. Would anyone have one or more?
I see the pistons referred to as dogbone pistons on some forum posts due to the shape of the pocket in the crown.
They are standard 92 mm with the letters ART cast on the side. Would anyone have one or more?