Whiteline Anti lift Kit. Has/can anyone fitted one to a newage.

E

ericsti

Guest
As above lads I have a full anti lift kit from whiteline ready to be fitted to my car thanks to John M's genorousity. :clap: Thanks John. :thumbsup:

On problem is it has no fitting instructions and I haven't a clue even where on the car the go or bit they replace. :ponder2:

Can anyone help a fella out? :dontknow:
 
have never done a set eric but i would reckon a ramp is needed !!!!!
pm jomo and he'll give ya the info i guess!!!
doing a set soon on my own but not till summer!!!
 
i fitted mine. Handy job, just replace the the existing on the end of the wishbone where it pivots on the under carriage. I did mine just using a jack but would be handy to have a lift. Makes a great job of the car, great upgrade.
 
are they easy to get off the wishbone i have a set but looked like they are fairly tight sorry for hijacking the thread eric
 
ericsti said:
As above lads I have a full anti lift kit from whiteline ready to be fitted to my car thanks to John M's genorousity. :clap: Thanks John. :thumbsup:

On problem is it has no fitting instructions and I haven't a clue even where on the car the go or bit they replace. :ponder2:

Can anyone help a fella out? :dontknow:
Click to expand...

PM me your number, and I will call you. The newage has a subframe, and is quite different.

John
 
Just recently fitted them to my classic.
Pretty hard goin on your back with the car jacked up but well worth the result.
You'll need a Torque wrench for fitting though as bolts to chassi are very tight and once the kit is fitted you need to re torque the bolts to chassi :thumbsup:
 
ALK replace the stock factory transverse link bushing mounts with redesigned units that will prove better toe control at speed/braking and crisper turn-in as well as change the suspension geometry by adding additional positive caster.

Basically it eliminates the understeering... and increases steering response and better turn-in characteristics. :thumbsup: Great upgrade!
 
This is what the Anti lift kit looks like :thumbsup:
 

Attachments

  • ALK.gif
    ALK.gif
    11.6 KB · Views: 114
  • 0 bytes · Views: 114
  • 0 bytes · Views: 114
  • 0 bytes · Views: 114
  • 0 bytes · Views: 114
Thats not what I got off John.

He said it was an anti lift kit.

It's all nuts, washers bolts and yellow covers. :ponder2:
 
I'll have to get it the weekend lads as the car is in a top secret location in Dublin and I'm in the curragh. :icon_cry:
 
Don't think so. I had a look on the white line site and don't think it's them. Two parts are the same as another two and these screw into one another and have a ball joint either end that a bolt goes through. There are yellow covers for the ball joints " I think"
 
Sounds like your describing these spherical bearing drop links
 

Attachments

  • WHITELINE_DROPLINKKITS.jpg
    WHITELINE_DROPLINKKITS.jpg
    13.2 KB · Views: 0
  • 0 bytes · Views: 0
  • 0 bytes · Views: 0
  • 0 bytes · Views: 0
  • 0 bytes · Views: 0
You must log in or register to reply here.
Back
Top