would love to make my das sti like this one

chris139ryan said:
does anyone have any idea what sort of budget i wud to build a standard sti to that type of spec
Click to expand...

about 6k would get you that spec, if you already have the car
 
yeah i no its a beaut only thing u cud add 13k vat onto that to bring it over here and thats to much for the gov hate them. :comp26:
 
Engine wise, not much!
The standard engine will be grand,
TD05 20g €1000 new (€650 used)
Turbo intake pipe €300 not at all nessisery because the 20g has a 2.5"inlet!
Headers and exhaust system €1600
One thing I would add is a 3 port boost solinoid! €300??
Fuel pressure reg, Pump and filter, €450
Mapping €800??
Labour on fitting?? 2-3 days?? it's just a turbo, headers and exhaust!
ECU will do boost control, injecters are grand,
so by above reconning about €5000 :ponder: I imagen duffman's estimate of €6K would probably work out more realistic!
So it is quite a bit of cash!!! I imagen you could get alot of above 2nd hand also

If I was starting again, I would probably just go as far as that and then leave it at that! Only change I would make to the spec is I'd use a 321H instead of the 20g, for spool about 800-1000rpm sooner! but €600 more expencive
Dan
 
great advice dan. il start tryin to source second hand parts after my exams see how the budget stretches. seen ur forseter down at stitunning when i was down beautiful looking machine and its standard looking which is great. before starting my budget or plans with the sti il pop down to dave and see wat he recommends. that man is a genius and he doesnt bullshit u like most mechanics. he wont let u spend money that u dont need to spend. top bloke :beerbang:
 
I seemed to do everything the wrong way first and then get it right second or third time around!
Be sure to give me a ring before you get started,
I'm very sure I can save you a lot of grief

0876602141 :thumbsup:
Dan
 
Hi Chris,

td05 20g = e1300.00
fuel reg = e275.00
fuel pump =e110.00
remap isdc member =e850.00
intake pipe = not needed (unless factory one damaged)
cosworth panel filter =e50.00
exhaust headers = not nessasary
full decat exhaust= STi Tuning STR =e690.00
Heatwrap Downpipe = e75.00
3port Boost Solinoid HDI = e145.00
Labour Approx 12 hrs =e600

TOTAL e4095.00

Power output would expect in or about 365=375 all cars differ.

DAVE
 
do be down there a few times a year my aunt lives down there. only bout 40mins down but its a fun drive to stretch the subarus legs
 
3 port controls the boost better, so you get less boost spikes and mantains steady boost through out the rev range,
Fuel pressure reg, is used generally as just a gauge, but you can up your pressure to make your injectors work harder,
or words to that effect!
Dan
 
Ah ha, ok.
Cheers Dan,

I see your hoping to make the torque fest track day. It sounds like a good setup.

Now to pull the engine out of the sti and get her sorted!
 
You must log in or register to reply here.
Back
Top