Maybe the club should chip in and buy one of these fuel analysis machines - its the only way to be sure
http://www.grabner-instruments.com/Products/FuelAnalysis/irox2000.aspx
Features
9 Specific Oxygenates (ASTM D5845)
14 Specific Aromatics and Benzene (ASTM D6277, correlation to EN238)
Total Parameters: Aromatics, Oxygen, Olefins (incl. Di-Olefins) & Saturates (correlation to ASTM D1319)
Octane numbers: RON, MON (correlation to ASTM D2699 and D2700)
Calculation of AKI and Drivability Index
Distillation properties: IBP, T10, T50, T90, FBP, E200, E300 (correlation to ASTM D86)
Vapor Pressure (correlation to ASTM D5191 and D6378)
MMT, Nitromethane and DCPD determination
Optional 6-position sampler
Built-In Density Meter (Anton Paar) to convert the concentration of substances from volume% to mass% (ASTM D7777)
Automatic Sample Introduction
Small sample volume: 7ml
Fast & easy on-site calibration:
Addition of outlier fuels to the correlation library in less than 4 min.
Laboratory and Field Applications
MINIWIN IROX-PC software
ONLY 3 MINUTES FOR A COMPLETE GASOLINE ANALYSIS
PROPERTIES AROMATICS wt%
RON 70 - 105 Benzene 0 - 10%
MON 70 - 95 Toluene 0 - 20%
AKI 80 - 100 o-Xylene 0 - 20%
Distillation IBP, T10, T50, T90, FBP p-Xylene 0 - 20%
E200, E300 (°F) m-Xylene 0 - 20%
RVP 35 - 95 kPa Ethyl benzene 0 - 20%
Driveability Index 950 - 1380 Propyl benzene 0 - 20%
Density 0.500 - 1,999 g/cm3 2-Ethyl toluene 0 - 20%
Precision of ± 0.001 g/ccm3 3-Ethyl toluene 0 - 20%
density measurement (SD = ± 0.0005 g/ccm3) 4-Ethyl toluene 0 - 20%
Mesitylene 0 - 20%
COMPONENTS Pseudocumene 0 - 20%
MMT 45 - 10,000 ppm Isodurene 0 - 20%
Nitromethane 0 - 9% Naphthalene 0 - 10%
DCPD 0 - 10%
TOTAL PARAMETERS *)
OXYGENATES Aromatics 0 - 80%
MTBE 0 - 20% Olefins 0 - 50%
TAME 0 - 20% Oxygen 0 - 8%
ETBE 0 - 20% Saturates 20 - 100%
DIPE 0 - 20%
Methanol 0 - 15%
Ethanol 0 - 25%
Iso-Propanol 0 - 20%
2-Butanol 0 - 25%
ter-Butanol 0 - 25%