In the market for some Brembo's

[Scoobymaniac]

full set front and rear brembos off a tommi mak evo 6 600 euro

as far as i know the bolt pattern is different so they wouldnt fit Subaru?

AFAIK the EVO Brembo's are Identical! I've heard before of lads putting them on scoobies, only difference is they're red

 

[davelegacy]

326mm

 

[Altezza-Dan]

326mm

so there's only 10mm in the difference between my stockers and them. are they any thicker?

 

[davelegacy]

not sure thickness of your own... brembos from memory in or around 30mm

 

[Altezza-Dan]

not sure thickness of your own... brembos from memory in or around 30mm

30mm on mine too

 

[Altezza-Dan]

so few options im looking at:

Prodrive 330mm kit:

http://www.prodrive.com/products_level2.html?id=33&p=12

Brembo 4pot 325mm kit

AP racing 4 pot 325mm kit

there is a 6 pot AP racing kit but i dont think they would fit behind my wheels

http://www.godspeedbrakes.co.uk/Alloy_Calipers/alloycal.htm

the disc sizes range from 308mm to 355mm, how much difference would there be in terms of stopping power comparing largest disc to the smallest

 

[STiBrian]

335mm AP 6 pots will fit behind your wheels Dan

 

[Rob Spec C]

The bigger the disk, the better the stopping power, makes a big difference. I think i'm right in saying your wheels are 17" so you won't get much more than about 330mm disks under your wheels

 

[Altezza-Dan]

so would the AP Racing 4 pots or the Brembo four pots be a better choice? im thinking 325mm four pot kit would be enough for mine saying that the cheapest 355mm kit is the Prodrive ones

 

[STiBrian]

so would the AP Racing 4 pots or the Brembo four pots be a better choice? im thinking 325mm four pot kit would be enough for mine saying that the cheapest 355mm kit is the Prodrive ones

355mm kit will only fit under 18 inch wheels

 

[dohcturbo]

550ster for the calipers.

http://www.pistonheads.com/SALES/1398682.htm