What did you do to your car today?

SPent 6 hours today trying to change the fooking disks. The only thing I was worried about when starting was pulling the threads on the brembos. After that turned out alright, the disks turned out to be welded to the hubs with rust. Back up in the morning now to try and finish them off :angry1: :angry1: :icon_hang: :icon_hang:
 
Rob Spec C said:
SPent 6 hours today trying to change the fooking disks. The only thing I was worried about when starting was pulling the threads on the brembos. After that turned out alright, the disks turned out to be welded to the hubs with rust. Back up in the morning now to try and finish them off :angry1: :angry1: :icon_hang: :icon_hang:
A few good clatters of a hammer in between the threads should break the rust, be careful not to hit threads though! :thumbsup:
 
midlandbe5 said:
Rob Spec C said:
SPent 6 hours today trying to change the fooking disks. The only thing I was worried about when starting was pulling the threads on the brembos. After that turned out alright, the disks turned out to be welded to the hubs with rust. Back up in the morning now to try and finish them off :angry1: :angry1: :icon_hang: :icon_hang:
A few good clatters of a hammer in between the threads should break the rust, be careful not to hit threads though! :thumbsup:

Unfortunately not, seems to be well and truly on there. The only thing I'm doing now tomorrow is to put the bolts through the disks and see if they pop off. Say a prayer for me :pray: :pray:
 
mine were the same robbie . wouldnt budge eventually got them off . think I used a long bolt to pop them in the end
 
Tommy 555 said:
mine were the same robbie . wouldnt budge eventually got them off . think I used a long bolt to pop them in the end
That's the best way to get them off
 
Amazing what a bit of knowledge can do, if I had brains I'd be dangerous.

Job finally done after about 7 hours :subaru:

20130224_110409_zps97fac798.jpg


20130224_121609_zps3b72b23a.jpg
 
fitted a cool new odyssey battery its way lighter and smaller :icon_grin:
doing a bit of diy on the clamp and painting it just making things look new again
IMAG0008_zpsd3339167.jpg

IMAG0009_zps7bfcb4ae.jpg
 
power steering fluid...
fuel filter now after my cuppa.

bleed brakes tomorrow, hopefully do gearbox and engine oil + filter.

bought gear oil and engine oil today too, stung with 110e LOL
 
Back
Top